Dell PowerEdge R210 - Manual (Page 41)

Back to Contents Page
Jumpers and Connectors
Dell™ PowerEdge™ R210 Systems Hardware Owner's Manual
System Board Jumpers
System Board Connectors
Disabling a Forgotten Password
This section provides specific information about the system jumpers. It also provides some basic information on jumpers and switches and describes the
connectors on the system board.
System Board Jumpers
Figure 6 -1 shows the location of the configuration jumpers on the system board. Table 6 -1 lists the jumper settings.
Table 6-1. System Board Jumper Settings
System Board Connectors
Figure 6-1. System Board Connectors
Table 6-2. System Board Jumpers and Connectors
Jumper Setting Description
PWRD_EN
(default)
The password feature is enabled
(pins 2-4)
The password feature is disabled
(pins 4-6)
NVRAM_CLR
(default)
The configuration settings are retained at system boot (pins 3-5)
The configuration settings are cleared at the next system boot (pins 1-3)
Item Connector Description
1 3
1
4
2
Memory module slot 3
Memory module slot 1 (white release lever)
Memory module slot 4
Memory module slot 2 (white release lever)
2 CPU Processor