Idrac6 enterprise card (optional), Removing an idrac6 express card, Installing an idrac6 enterprise card – Dell PowerEdge R210 User Manual
Page 31
7.
If applicable, reinstall the expansion card. See
8.
.
9.
Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
Removing an iDRAC6 Express Card
1.
Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.
2.
3.
If installed, remove the expansion card from the expansion slot. See
4.
.
As the holder releases from the standoff, the connector under the card disengages from the system board connector.
5.
Angle the card so that the notch on the card slips through the clip on the system board.
6.
If applicable, reinstall the expansion card. See
7.
.
8.
Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
iDRAC6 Enterprise Card (Optional)
Installing an iDRAC6 Enterprise Card
1.
Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.
2.
3.
If installed, remove the expansion card from the expansion slot. See
1
iDRAC6 Express card
2
plastic standoff tab
3
notch
4
clip
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as
authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not
authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as
authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not
authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.