Dell PowerEdge R210 - Manual (Page 18)

1. Using the system key, unlock the front bezel (if locked).
2. Lift up the release latch next to the keylock.
3. Rotate the left end of the bezel away from the front panel.
4. Unhook the right end of the bezel and pull the bezel away from the system.
Figure 3-2. Removing and Installing the Front Bezel
Installing the Front Bezel
1. Hook the right end of the bezel onto the chassis.
2. Fit the free end of the bezel onto the system.
3. Secure the bezel with the keylock. See Figure 3 -2 .
Opening and Closing the System
Opening the System
1. Turn off the system and attached peripherals, and disconnect the system from the electrical outlet and peripherals.
2. Rotate the latch release lock counter clockwise to the unlocked position. See Figure 3 -3 .
3. Grasp the cover on both sides while pressing your thumbs on the latch release lock and the indent, carefully slide the cover toward the back of the
system, and lift it away from the system. See
Figure 3 -3 .
Figure 3-3. Opening and Closing the System Cover
1 release latch 2 keylock
3 hinge tab 4 bezel
WARNING: Whenever you need to lift the system, get others to assist you. To avoid injury, do not attempt to lift the system by yourself.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as
authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not
authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.