beautypg.com

Expansion-card riser, Removing an expansion card, Removing an expansion-card riser – Dell PowerEdge R210 User Manual

Page 24

background image

 

8.

Connect any cables to the expansion card.

 

9.

Close the system. See

Closing the System

.


 

10.

Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals

 

Removing an Expansion Card

 

 

1.

Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.

 

2.

Open the system. See

Opening the System

.


 

3.

Disconnect all cables from the card.

 

4.

Open the expansion-card latch. See

Figure 3

-7

.


 

5.

Grasp the expansion card by its edges and carefully remove it from the connector on the expansion-card riser.

 

6.

If you are removing the card permanently, install a metal filler bracket over the empty expansion slot opening and close the expansion-card latch.

 

7.

Close the system. See

Closing the System

.


 

8.

Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

 

Expansion-Card Riser

The system's expansion-card riser supports an x16 link Generation 2 PCIe expansion card.

 

Removing an Expansion-Card Riser

 

 

1.

Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.

 

2.

Open the system. See

Opening the System

.


 

3.

If installed, remove the expansion card from the expansion slot. See

Removing an Expansion Card

.


 

4.

To remove the expansion-card riser, press the release tab and lift the expansion-card riser from the chassis. See

Figure 3

-8

.

 

Figure 3-8. Installing or Removing an Expansion-Card Riser

3

expansion-card riser

 

 

CAUTION:

Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as

authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not
authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

NOTE:

You must install a filler bracket over an empty expansion slot to maintain Federal Communications Commission (FCC) certification of the

system. The brackets also keep dust and dirt out of the system and aid in proper cooling and airflow inside the system.

CAUTION:

Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as

authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not
authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.