Dell PowerVault MD3200i - Manual (Page 98)

98 Configuration: About Your Host
The Preview window is displayed.
11 Click Finish.
Removing Host Access
To remove host access:
1 In the AMW, select the Mappings tab, select the host node in the
Topology pane.
2 Perform one of these actions:
• Select Mappings Remove.
• Right-click the host node and select Remove from the pop-up menu.
The Remove confirmation dialog is displayed.
3 Type yes.
4 Click OK.
For more information, see the PowerVault Modular Disk Storage Manager
online help topics.
Managing Host Groups
A host group is a logical entity of two or more hosts that share access to
specific virtual disks on the storage array. You create host groups with MDSM.
All hosts in a host group must have the same host type (operating system). In
addition, all hosts in the host group must have special software, such as
clustering software, to manage virtual disk sharing and accessibility.
If a host is part of a cluster, every host in the cluster must be connected to the
storage array, and every host in the cluster must be added to the host group.
Creating a Host Group
To create host groups:
1 In the AMW, select the Mappings tab.
2 In the Topology pane, select the storage array or the Default Group.
3 Perform one of the following actions:
• Select Mappings Define Host Group
book.book Page 98 Tuesday, June 18, 2013 3:15 PM