Dell PowerVault MD3200i - Manual (Page 120)

120 Configuration: Disk Groups and Virtual Disks
To change the security key:
1 In the AMW toolbar, select Storage ArrayPhysical Disk Security
Change Security Key.
The
Confirm Change Security Key window is displayed.
2 Type yes in the text field, and click OK.
The Change Security Key window is displayed.
3 In Secure key identifier, enter a string that becomes part of the secure key
identifier.
You may leave the text box blank, or enter up to 189 alphanumeric
characters without white space, punctuation, or symbols. Additional
characters are generated automatically.
4 Edit the default path by adding a file name to the end of the path or click
Browse, navigate to the required folder and enter the name of the file.
5 In Pass phrase, enter a string for the pass phrase.
The pass phrase must:
• be between 8 and 32 characters long.
• contain at least 1 uppercase letter.
• contain at least 1 lowercase letter.
• contain at least 1 number.
• contain at least 1 non-alphanumeric character, for example, < > @
+.
The pass phrase that you enter is masked.
6 In Confirm pass phrase, re-enter the exact string you entered in Pass
phrase.
Make a record of the pass phrase you entered and the security key
identifier it is associated with. You need this information for later secure
operations.
7 Click Change Key.
8 Make a record of the security key identifier and the file name from the
Change Security Key Complete dialog, and click OK.
book.book Page 120 Tuesday, June 18, 2013 3:15 PM