Dell UPS 4200R - Manual (Page 103)

Redundancy 104
Figure 88. Dell Network Management Card Web Interface
Use Case #2
You want to have a shutdown after a predefined time of 10 min. The shutdown must occur, even if only
one UPS is on battery.
• In this case, each server can have its own shutdown timer (10 min, 8 min, 6 min…). To set a
predefined time of 10 min, configure the shutdown timer for 10 min in the Edit Shutdown
Configuration dialog box.
–
Figure 89 illustrates the Dell MUMC default configuration available from Settings > Shutdown >
Edit Shutdown Configuration
.
NOTE: This is the default configuration on the Dell Network Management Card (refer to previous use case).
0119_2-Dell MUMC UG.book Page 104 Saturday, November 2, 2013 4:59 PM