Faxing, Configuring fax initial settings, Setting your country – Dell C1765NF MFP Laser Printer User Manual

Page 269: Setting the printer id, 21 faxing

Faxing

267

Faxing

NOTE:

If the Function Enabled setting for

Fax

is set to

On(Password)

, you need to enter the four digit password to use the

fax function. If the Function Enabled setting for

Fax

is set to

Off

, the fax function is disabled. For details, see "Function

Enabled" on page 197.

NOTE:

If the

Panel Lock Set

is set to

Enable

, you need to enter the four digit password to enter the

Admin Menu

Configuring Fax Initial Settings

NOTE:

The following settings can be configured also using Advance Tools on Easy Setup Navigator.

Setting Your Country

You need to set the country where your printer is used for using the fax service on the printer.

1 Press the

(Menu) button.

2 Press the

button until System is highlighted, and then press the

(Set) button.

3 Press the

button until Admin Menu is highlighted, and then press the

(Set) button.

4 Press the

button until Fax Settings is highlighted, and then press the

(Set) button.

5 Press the

button until Country is highlighted, and then press the

(Set) button.

6 Press the

button to select the country where the printer is used, and then press the

(Set) button.

7 Ensure that Are You Sure? is displayed, press the

button to select Yes, and then press the

(Set)

button.
The printer restarts automatically to apply the settings.

NOTE:

In case of either one, when you configure the country setting, the information, which is registered to the device, is

initialized.

Setting the Printer ID

In most countries, you are required by law to indicate your fax number on any fax you send. The printer ID,

containing your telephone number and name or company name, will be printed at the top of each page sent from

your printer.

1 Press the

(Menu) button.

2 Press the

button until System is highlighted, and then press the

(Set) button.

3 Press the

button until Admin Menu is highlighted, and then press the

(Set) button.

4 Press the

button until Fax Settings is highlighted, and then press the

(Set) button.

5 Press the

button until Fax Number is highlighted, and then press the

(Set) button.

6 Enter your fax number using the number keypad.

NOTE:

If you make a mistake while entering numbers, press the

(Backspace) button to delete the last digit.

7 Press the

(Set) button when the number on the display is correct.

8 Press the

button until Fax Header Name is highlighted, and then press the

(Set) button.

9 Enter your name or company name using the numeric keypad.

You can enter alphanumeric characters using the numeric keypad, including special symbols by pressing the 1, *,

and # buttons.