Dell C1765NF MFP Laser Printer - Manual (Page 117)

Dell™ Printer Configuration Web Tool 115
Copy Defaults
Purpose:
To create your own default copy settings.
Values:
Copy Color Balance
Purpose:
To specify the default color balance level.
Values:
Copy Settings
Purpose:
To configure the copy settings.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Values:
Color Selects mode for color or black and white copying.
Reduce/Enlarge Sets the default copy reduction/enlargement ratio.
Custom Reduce/Enlarge Sets a custom reduction/enlargement ratio within the range of 25% to 400% when Reduce/Enlarge
is set to Custom.
Original Type Sets the copy image quality.
Document Size Sets the default document size.
Lighter/Darker Sets the default copy density level.
Sharpness Sets the default sharpness level.
Auto Exposure Sets whether to suppress the background of the original to enhance text on the copy.
Color Balance (Red) Sets the color balance level of red.
Color Balance (Green) Sets the color balance level of green.
Color Balance (Blue) Sets the color balance level of blue.
Gray Balance Sets the gray balance level.
Multiple-Up Off* Does not perform multiple-up printing.
Auto Automatically reduces the original pages to fit onto one sheet of paper.
ID Copy Prints the original pages onto one sheet of paper in the original size.
Manual Prints the original pages onto one sheet of paper in the size specified in
Reduce/Enlarge.
Collated Sets whether to sort the copy job.
Margin Top/Bottom Sets the value of the top and bottom margins within the range of 0 mm to 50 mm/0.0 to 2.0 inch.
Margin Left/Right Sets the value of the left and right margins within the range of 0 mm to 50 mm/0.0 to 2.0 inch.
Margin Middle Sets the value of the middle margin within the range of 0 mm to 50 mm/0.0 to 2.0 inch.