Dell C1765NF MFP Laser Printer - Manual (Page 129)

Dell™ Printer Configuration Web Tool 127
Wireless LAN (Dell C1765nfw Color Multifunction Printer only)
Purpose:
To configure wireless network settings.
To connect the printer with a wireless network, be sure to disconnect the Ethernet cable.
NOTE: Once wireless LAN is activated, wired LAN protocol will be disabled.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Values:
Wireless Settings Wireless LAN Specifies whether to enable wireless connection.
SSID Specifies the name that identifies the wireless network using up to
32 alphanumeric characters.
Network Type Specifies the network type from either Ad-Hoc or Infrastructure.
MAC Address Displays the MAC address of the wireless network setting of the
printer.
Link Channel Displays the channel number of the wireless connection of the
printer.
Link Quality Displays the quality of the wireless network connection of the
printer.
Security Settings Encryption Select the security method from the list.
No Security
* Specifies No Security to
configure the wireless setting
without specifying a security
method from WEP, WPA-PSK
TKIP/WPA2-PSK AES, and
Mixed Mode PSK.
WEP 64 Bit ASCII (5 Bytes) Specifies the WEP 64 Bit ASCII
to use through the wireless
network.
WEP 128 Bit ASCII (13 Bytes) Specifies the WEP 128 Bit
ASCII to use through the
wireless network.
WEP 64 Bit Hex (10 Bytes) Specifies the WEP 64 Bit Hex to
use through the wireless
network.
WEP 128 Bit Hex (26 Bytes) Specifies the WEP 128 Bit Hex
to use through the wireless
network.
WPA-PSK TKIP *1 Specifies the WPA-PSK TKIP to
use through the wireless
network.
WPA2-PSK AES *1 Specifies the WPA2-PSK AES to
use through the wireless
network.
Mixed Mode PSK Specifies the Mixed Mode PSK
to use through the wireless
network.