Dell C1765NF MFP Laser Printer - Manual (Page 118)

116 Dell™ Printer Configuration Web Tool
Scan Defaults
Purpose:
To create your own default scan settings.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Values:
Fax Defaults
Purpose:
To create your own default fax settings.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Values:
Scan To Network Computer
(Network)*
Stores the scanned image on a computer using the Server Message Block (SMB)
protocol.
Server (FTP) Stores the scanned image on a server using the FTP protocol.
File Format Sets the file format to save the scanned image.
Color Sets whether to scan in color or in black and white.
Resolution Sets the default scan resolution.
Document Size Sets the default document size.
Lighter/Darker Sets the default scan density level.
Sharpness Sets the default sharpness level.
Auto Exposure Sets whether to suppress the background of the original to enhance text on the scanned image.
Margin Top/Bottom Sets the value of the top and bottom margins within the range of 0 mm to 50 mm/0.0 to 2.0 inch.
Margin Left/Right Sets the value of the left and right margins within the range of 0 mm to 50 mm/0.0 to 2.0 inch.
Margin Middle Sets the value of the middle margin within the range of 0 mm to 50 mm/0.0 to 2.0 inch.
TIFF File Format Sets the TIFF file format to TIFF V6 or TTN2.
Image Compression Sets the image compression level.
Max E-Mail Size Sets the maximum size of e-mail that can be sent, within the range of 50 K bytes to 16384 K bytes.
The default is 2048 K bytes.
Resolution Standard* Suitable for documents with normal sized characters.
Fine Suitable for documents containing small characters or thin lines or documents
printed using a dot-matrix printer.
Super Fine Suitable for documents containing extremely fine detail. The super fine mode is
enabled only if the remote machine also supports the super fine resolution.
Ultra Fine Suitable for documents containing photographic images.
Lighter/Darker Sets the default density level to be used for fax transmission.
Delayed Start Sets the fax transmission start time when sending a fax at a specified time.