Margin top/bottom, Margin left/right – Dell C1765NF MFP Laser Printer User Manual
Page 243
Copying
241
2 Press the
(Copy) button.
3 Press the
button until Multiple-Up is highlighted, and then press the
(Set) button.
4 Press the
button to select the desired setting, and then press the
(Set) button.
NOTE:
Values marked by an asterisk (
*
) are the factory default menu settings.
5 If necessary, customize the copy settings including the number of copies, contrast, and image quality. See "Setting
6 Press the
(Start) button to begin copying.
When you are using the document glass and Multiple-Up is set to Auto, ID Copy, or Manual, the display
prompts you for another page. Press the
button to select Yes or No, and then press the
(Set) button.
7 If you select Yes, press the
button to select Continue or Cancel, and then press the
(Set) button.
Margin Top/Bottom
To specify the top and bottom margins of the copy.
1 Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Loading an Original Document on the ADF" on page 272.
2 Press the
(Copy) button.
3 Press the
button until Margin Top/Bottom is highlighted, and then press the
(Set) button.
4 Press the
or
button or enter the desired value using the numeric keypad, and then press the
(Set)
button.
NOTE:
Values marked by an asterisk (
*
) are the factory default menu settings.
5 Press the
(Start) button to begin copying.
Margin Left/Right
To specify the left and right margins of the copy.
1 Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Loading an Original Document on the ADF" on page 272.
Off*
Does not perform multiple-up printing.
Auto
Automatically reduces the original pages to fit onto one sheet of paper.
ID Copy
Prints the original pages onto one sheet of paper in the original size.
Manual
Prints the original pages onto the one sheet of paper in the size specified in
Reduce/Enlarge
.
4 mm*/0.2 inch*
Specify the value in increments of 1 mm/0.1 inch.
Available Range:
0-50 mm/0.0-2.0 inch