Dell C1765NF MFP Laser Printer - Manual (Page 134)

132 Dell™ Printer Configuration Web Tool
Scan to PC
Purpose:
To specify the client when scanning data.
Values:
Reset Print Server
Purpose:
To initialize NVM (non-volatile memory) for the network feature and reboot the printer. You can also initialize the
NVM of the printer from Reset Defaults in the Printer Settings menu.
Values:
Security
The Security tab contains the Set Password and IP Filter (IPv4) pages.
Set Password
Purpose:
To set or change the password that is required to access the setup parameters of the printer from the Dell Printer
Configuration Web Tool.
This page can also be displayed by clicking Set Password in the left frame.
NOTE: If you forgot your password, initialize NVM (non-volatile memory) to restore the password to the default (NULL). See
"Reset Print Server" on page 132.
NOTE: When you change the password to lock the operator panel, set the password from Panel Lock Set in the Printer Settings.
Values:
FTP Client Connection Time-Out Sets the connection time-out period from 1 to 60 seconds.
FTP Passive Sets whether to enable the FTP Passive mode.
SMB Client Connection Time-Out Sets the connection time-out period from 1 to 60 seconds.
Initialize NIC NVRAM
memory and restart printer.
Click Start to initialize NVM. Network settings will revert to the factory default settings and
reboot the network capability.
Restart Printer Click Start to reboot the printer.
Administrator Password Sets the password using up to 10 alphanumeric characters. The password will appear as asterisks
(*) in the field when it is entered.
Re-enter Administrator
Password
Enter the password again to confirm.