Dell C1765NF MFP Laser Printer - Manual (Page 193)

Understanding the Printer Menus 191
mm / inch
Purpose:
To specify the measurement unit displayed after the numeric value on the operator panel.
Values:
NOTE: The default for mm/inch varies depending on country-specific factory default.
Auto Log Print
Purpose:
To automatically print a job history report after every 20 jobs.
Values:
NOTE: The job history report can also be printed using the Report List menu.
Low Toner Alert Msg
Purpose:
To specify whether to show the alert message when the toner is low.
Values:
Out of Paper Off Does not emit a tone when the printer runs out of paper.
Low Emits a tone at the specified volume when the printer runs out of paper.
Medium*
High
All Tones Off Disables all the alert tones.
Low Sets the volume of all the alert tones at once.
Medium*
High
Millimeters (mm) Specifies the default measurement unit.
Inches (")
Off* Does not automatically print a job history report.
On Automatically prints a job history report.
Off Does not show the alert message when the toner is low.
On* Shows the alert message when the toner is low.