Dell C1765NF MFP Laser Printer - Manual (Page 163)

Understanding the Tool Box Menus 161
Diagnosis
The Diagnosis tab contains the Chart Print, Environment Sensor Info, Clean Developer, and Refresh Mode pages.
Chart Print
Purpose:
To print various charts that can be used for diagnosing your printer.
Values:
Environment Sensor Info
Purpose:
To output the internal environment sensor information of the printer to Result by clicking Get Environment Sensor
Info.
Clean Developer
Purpose:
To rotate the developer motor and stir the toner in the toner cartridge.
Values:
Refresh Mode
Purpose:
Fax Broadcast Print Disable Does not print a transmission report after a fax transmission to multiple
destinations.
Print On Error Prints a transmission report only when an error occurs.
Print Always Prints a transmission report after every fax transmission to multiple destinations.
Fax Protocol Print Disable Does not print a protocol monitor report.
Print On Error Prints a protocol monitor report only when an error occurs.
Print Always Prints a protocol monitor report after every fax transmission.
Country Selects the country where the printer is used.
Apply New Settings After you complete the settings, click Apply New Settings to apply the changes.
Restart printer to apply new settings Click Restart printer to apply new settings to apply the changes.
Pitch Configuration Chart Click to print full halftone pages for yellow, magenta, cyan, and black. Also outputs
pages to check the pitch.
Ghost Configuration Chart Click to print a chart to check for ghost printing.
4 Colors Configuration Chart Click to print bands of yellow, magenta, cyan, and black with varying density.
MQ Chart Click to print charts to check for the binding.
Alignment Chart Click to print a chart, and then check for proper alignment of the print image on
the paper.
Drum Refresh Configuration Chart Click to print a chart to check the light fatigue of the drum unit.
Clean Developer Click Start to stir the toner.