Dako Autostainer - Manual (Page 14)

14 Dako Autostainer | User Guide
Software Specifications
Operating System Windows ® 95/98, or equivalent.
Operating Logic Designed to calculate the most time-efficient sequence to
complete a programmed staining run.
Protocol Logic Flexible selection of steps including rinses.
Maximum of 35 protocol steps (including rinse steps).
Idle Rinse
Rinse Default Settings
Buffer is applied to slides during a staining run to keep
specimens wet when no reaction is occurring.
Buffer rinse every 30 minutes prior to the start of a run, when
delayed start is selected.
Buffer rinse every 30 minutes during a staining run.
Water rinse every 60 minutes after completion of run.
Default settings for time and the amount of buffer dispensed can
be changed by a Dako representative upon request.
Incubation Time Minimum time is 2 minutes.
Accessories Included with the Dako Autostainer
Slide Racks 4 non-disposable slide racks with a 12 slide capacity/rack. The
slide racks are suitable for standard glass slides; they are
removable and interchangeable.
Reagent Racks 2 removable reagent racks. Each reagent rack holds a
maximum of 32 reagent vials.
Reagent Vials 100 reagent vials and caps. Each vial holds a maximum of 15
mL of reagent.
Buffer Container 1 ten liter plastic container.
Deionized Water
Container 1 ten liter plastic container (not available with the “01” hardware
version of the Dako Autostainer).
Waste Containers 2 ten liter plastic containers.
User Guide 1 User Guide with detailed operating instructions.