beautypg.com

2 accessories – Bio-Rad PROTEAN® i12™ IEF System User Manual

Page 7

background image

Chapter 1 PROTEAN IEF System

| 3

PROTEAN i12 IEF System Instruction Manual

| 3

1.1.2 Accessories

The PROTEAN i12 IEF system includes the accessories listed in Table 1.2 and shown in Figure 1.3.

Table 1.2. Accessories for the PROTEAN i12 system. Accessories not included may be purchased separately (see Appendix G,
Ordering Information).

Component

Quantity Description

Included with the PROTEAN i12 IEF System
i12 focusing trays

1 each

For IEF (and rehydration) of 1–12 IPG strips; each tray includes 2 IPG

with IPG strip retainers

(7, 11, and 17 cm)

strip retainers to maintain contact between the IPG strip and

electrodes for IEF with the gel-side down configuration

Electrode assemblies

1 set each

Positive (+) and negative (-) electrode assemblies; provide contact

between each IPG strip and its power supply

i12 rehydration/equilibration trays

25 each

Disposable trays for passive rehydration and equilibration of IPG

(7, 11, and 17 cm)

strips

Electrode wicks

100 gel-side up

Collect salts and other charged impurities as well as proteins with

500 gel-side down

isoelectric points (pI) outside the pH range of the IPG strip (use is

recommended)

ReadyStrip

IPG strips

12 each

Medium for isoelectric separation of proteins

pH 3–10

(7, 11, and 17 cm)

Mineral oil

500 ml

For overlay of IPG strips to prevent dehydration

Forceps

2 pair

For manipulation of IPG strips

Cleaning brushes

Set of 2

For cleaning the focusing tray and electrode assemblies

Cleaning concentrate

1 L

For cleaning the focusing tray and electrode assemblies

USB flash drive

2

Memory data storage device integrated with a USB interface; for

storage and transfer of data from the PROTEAN i12 IEF cell

Stylus

3

Used to manipulate touch screen (user interface)

Leveling bubble

1

Indicates whether the IEF cell is level

Power cord

1

Connects the IEF cell to a power source

ReadyPrep

rehydration buffer

10 ml

For rehydration and sample loading of IPG strips

Not Included with the PROTEAN i12 IEF System
i12 focusing trays

(13, 18, and 24 cm) For IEF (and rehydration) of 1–12 IPG strips;

each tray includes 2 IPG strip retainers

i12 rehydration/equilibration trays

(13, 18, and 24 cm) Disposable trays for passive rehydration and

equilibration of IPG strips

Sample cup holder and sample cups

For cup loading of samples

Fig. 1.3. PROTEAN i12 accessories.

i12 rehydration/equlibration trays

Electrode wicks

i12 focusing trays

Electrode assemblies

Cleaning brushes

Styluses

USB flash drive

Leveling bubble

IPG strip retainers

Forceps

Mineral oil

Cleaning concentrate

ReadyStrip IPG strips

ReadyPrep rehydration buffer