Bio-Rad PROTEAN® i12™ IEF System - Manual (Page 32)

Chapter 5 Setting Defaults and Managing Folders
28 | PROTEAN i12 IEF System Instruction Manual 28 |
5.2 Managing Files and Folders
(Files)
The PROTEAN ® i12 ™ IEF cell stores saved and
preprogrammed protocols and run data and sample
details files. Use the options under Files to:
■
Delete files and folders
■
Copy files to a different location
■
Create new folders
5.2.1 Navigating the Files Structure
1. Press Files on the Main screen.
2. Select the drive.
3. Select a folder to display its contents.
■
View File Type — displays files of a certain type
■
Create Folder — creates a new folder
■
Delete Folder — opens the Delete Confirmation
screen and options to Cancel or Delete
■
Main — returns to the Main screen
4. Select a file. The file name is highlighted and
options to Delete File and Copy File appear.
■
Delete File — opens the Delete Confirmation
screen and options to Cancel or Delete
■
Copy File — opens the Copy File To window
(see Section 5.2.2)
If changes are made and Save Settings is not pressed, the new values are implemented (except
System Time) in the current run, but they revert to the previous settings when the system is shut
down.
Save Settings — saves the settings as displayed
More Settings — touch screen calibration and firmware updates
Strip Part Numbers — lists the part numbers of ReadyStrip ™ IPG strips (based on length and pH range)