B&G H2000 Pilot *DISCONTINUED* - Manual (Page 61)

h2000 Autopilot User Manual
Part 3 - Commissioning and Calibration
HB-0842-04
3-7
3.2 COMMISSIONING MODE SELECTION
3.2.1 Entering Commissioning Mode
Notes
1.
The autopilot must be in STANDBY to carry out this
operation.
2. If it is the first time the autopilot has been commissioned,
SELCT will be displayed instead of SAIL, PWR P or PWR D.
(1) To enter the commissioning mode
simultaneously press the < > Keys next to the
COURS legend.
(2) To scroll backwards and forwards through
the list of commissioning parameters, press either of
the < > keys next to the B TYPE legend.
(3) To exit commissioning mode press the key
next to the EXIT legend.