Great Plains 1625AHL Operator Manual - Manual (Page 41)

Great Plains Manufacturing, Inc. Table of Contents Index Operating Instructions 37
2014-04-21 Table of Contents Index 411-020M
Loading Seed, continued
Possible Agricultural Chemical Hazards:
Read and follow all supplier cautions for safe handling of
treated seed.
Irritant and Chronic Exposure Hazards:
Do not mix lubricants into seed with hands or any part of
body. Wear protective equipment. Use tools. See page 128.
7. Pre-mix seed and lubricant. For clean seeds other
than milo, cotton, and sunflowers sprinkle Ezee Glide
Plus at 60 ml per 35 liters of seed (
1 ⁄
4
cup per bushel
or unit of seed).
For milo, cotton, and sunflowers double the
application to 120 ml per 35 liters (
1 ⁄
2
cup or more
per bu or unit) of seed.
Population Risk:
The seed must be properly lubricated, starting with the first
seed through the meter. If unable to pre-mix prior to loading,
pre-mix at least 4 liters (one gallon) per hopper, and load this
seed first. Fill the hoppers to half full with fresh seed. Add half
the lubricant and stir. Complete filling the hoppers and
sprinkle the remaining lubricant on top.
8. Add seed and lubricant to hoppers.
9. Close lids. Position front end of lid over front end lip
of hopper. Snap lid firmly in place.
Figure 25
Adding Seed Lubricant
34710