About row count and spacing, Set planter row count, Set planter row spacing – Great Plains 1625AHL Operator Manual User Manual
Page 162: Row setup, Ab c, Ab c d
![background image](/manuals/599115/162/background.png)
158
1625AH
Great Plains Manufacturing, Inc.
411-020M
2014-04-21
About Row Count and Spacing
On models 1625AHD, leads are connected to seed
sensors first (for example 1…12), and remaining leads to
dry fertilizer blockage sensors (for example 13…24).
Sensors for seed tubes are typically configured for
population (counting seeds), but may alternatively be
configured for blockage.
Set Planter Row Count
The PM400 supports three row configurations
pre-defined by you. You may need only one.
Refer to Figure 136
At first power-up, the PM400 usually has an incorrect row
count for your planter.
10. Press the PLANTER SETUP
key.
Note that the Planter Configuration Indicator
is
under the “1” in the Configuration block
.
This change is for Configuration 1.
11. Press the Right Arrow
key to highlight the
Number of Rows
field
.
12. Press the ENTER
key to modify the # of Rows.
Refer to Figure 137
13. Use the Left and Right Arrow keys (
or
) to
select the digits to modify. Use the Up or Down
Arrow keys (
or
) to increment or decrement.
Change the row count to the table value for your
planter model and operating configuration.
14. Press the ENTER
key to save the correct row
count.
Set Planter Row Spacing
15. Press the Down Arrow key
to select the Row
Spacing field
.
16. Use the Left and Right Arrow keys (
or
) to
select the digits to modify. Use the Up or Down
Arrow keys (
or
) to increment or decrement.
Change the row spacing to the value for your planter
model (70 cm).
17. Press the ENTER
key to save the corrected row
spacing.
Row Setup
18. Use Right Arrow key
to navigate to the “I/O”
field
.
19. Use the Left and Right Arrow keys (
or
) to
select a seeding icon
for the number of seed
rows (rows 1…12 in this example).
20. For row numbers above the seeding rows, use the
Up or Down Arrow keys (
or
) to change it to a
blockage icon
(rows 13…24 in this example).
21. Press the ENTER
key to save a revised row
configuration.
Figure 136
Planter Default Setup
31934
a
b
c
Figure 137
12-Row with Fertilizer Blockage
36250
a
b
c
d
a
b
d