Great Plains 1625AHL Operator Manual - Manual (Page 138)

134 1625AH Table of Contents Index Great Plains Manufacturing, Inc.
411-020M Table of Contents Index 2014-04-21
Gauge Wheel Scrapers
When planting in moist or sticky soils, these scrapers are
useful in preventing build-up that might otherwise result
in shallow planting.
Order one part per wheel (2 per opener).
The scrapers mount on the bottom rear of the depth
wheel arm, using the existing bolt and lock washer. The
slot in the scraper is long enough to clear the lower
grease zerk, and allow adjustment as wheel and scraper
wear.
For operations, see:
“Adjusting Gauge Wheel Scrapers” on page 78.
Lock-Up Pins
If rows are shut off, you can reduce unnecessary wear
on the unused row units by locking them up. Twin-row
planters include, as standard, one lock-pin per rear row.
For replacement pins, or for other planter models, order
one per row unit locked-up.
See “Row Unit Shut-Off” on page 83.
Seed Tube Brush
One brush is provided with the planter. Order the
following part for additional or replacement brushes.
See “Seed Tube Clean-Out” on page 104.
Wheel Scrapers Part Number
2
1 ⁄
2
inch Gauge wheel scraper 404-823A
3 inch Gauge wheel scraper 404-824A
4 inch Gauge wheel scraper 404-825A
25298
Description Part Number
PIN HTCH .63X5.75 USBL W/PIN 805-435C
27226
Description
Order
Number
SEED TUBE CLEANER BRUSH 891-259C
34089