tekmar 162 Setpoint Control Installation - Manual (Page 19)

19 of 32 © 2007 D 162 - 08/07
Item Field Range Access Description
SEC, LTD, USEr,
InST, ADV
Default = USEr
SEC
LTD
USEr
InST
ADV
ACCESS LEVEL
The access level of the setpoint control. The access
column shows which items are visible in each access
level.
Note:
This item is only available when DIP switch
1 is set to the Unlock position and the tN4 system
control DIP switch is set to the Unlock position.
°F, °C
Default = °F
USEr
InST
ADV
UNITS SECTION P
Select Fahrenheit or Celsius as the temperature
units.
ON, TMPY, OFF
Default = TMPY
InST
ADV
BACKLIGHT SECTION Q
Select whether the backlight displays permanently,
temporarily, or is off. The temporary backlight lasts
for 30 seconds.
– – –, 1 to 24 ADV
NUMBER OF DEVICES SECTION R
Number of tN4 devices connected to this tN4 bus.
Note: This item is only available when the setpoint
control has tN4 communication.
bus#:01 to bus#:24,
AUTO
Default = AUTO
SEC
LTD
USEr
InST
ADV
ADDRESS SECTION R
The tN4 bus address of this setpoint control.
Auto allows the tN4 system to automatically assign
an address to the setpoint control.
To manually set the address, use the Up or Down
buttons while in the ADV (Advanced) or InST (Installer)
access level.
Note:
This item is only available when the setpoint
control has tN4 communication.
InST
ADV
RESTORE DEFAULTS
Press the Up and Down buttons together to load the
factory defaults. The SELECT icon appears and then
the display shows DONE when the factory defaults
have been completed.
162, Software Version
SEC
LTD
USEr
InST
ADV
TYPE
Product number of this setpoint control. Hold the Up
button to view the software version.
MISC (Miscellaneous) Menu (1 of 1)
The Miscellaneous menu items set display and control
options such as access level and temperature units.
MISC MENU
After the last item, the control returns to the first item in the menu.