Scene menu, Sc hedule menu – tekmar 162 Setpoint Control Installation User Manual
Page 17
17 of 32
© 2007
D 162 - 08/07
SCENE Menu (2 of 2)
Note: The SCENE menu is not available when the Application Mode is set to Pool (6)
SCENE MENU
Item Field
Range
Access
Description
OFF, 0:05 to
24:00 hr, On
(in 5 min. increments)
Default = 1:00
LTD
USEr
InST
ADV
RUN TIME OCCUPIED
SECTION B, E, I
Select the amount time for the setpoint control to
operate at the occupied temperature when a Setpoint
Device Enable is provided.
Note:
This item is only available in Application Mode
2 (Hot Tub) or 5 (Floor) if a programmable setback
schedule is selected.
Note:
This item is only available in Application Mode 1
and 4 (Setpoint) if a programmable setback schedule
is selected and the Setpoint Device Enable setting
in the ADJUST menu is set from 1 through 12.
OFF, On
Default = OFF
InST
ADV
SCENE MENU
SECTION
M
Select whether or not to use the scene feature on the
setpoint control. When set to OFF, this item displays
first in the Scene Menu.
After the last item, the control returns to the first item in the menu.
Item Field
Range
Access
Description
NONE, ZONE, MST1,
MST2, MST3, MST4,
Mbr1, Mbr2, Mbr3,
Mbr4, UnOc
Default = NONE
InST
ADV
HEAT OR COOL SCHEDULE
SECTION
L
Selects the schedule used by the setpoint control.
If a schedule is not required, select NONE.
If the schedule is only used by this setpoint control,
select ZONE.
If the schedule is shared with other thermostats or
setpoint controls, select MST1 to MST4.
If the schedule is set on another thermostat or setpoint
control, select Mbr1 to Mbr4.
UnOc is not available in Mode 3.
Note:
This item can be viewed in the USER and INST
(Installer) access levels but can only be adjusted in
the ADV (Advanced) access level.
24 hr, 5-2, 5-11, 7dAY
Default = 5-11
InST
ADV
SCHEDULE TYPE
SECTION
L
Select the type of schedule.
Note:
This item is only available when the Heat or
Cool Schedule is set to ZONE or MST1 to MST4.
2 (Occ, UnOcc),
4 (Occ 1, 2,
UnOcc 1, 2)
Default = 4
InST
ADV
SCHEDULE MODE
SECTION
L
Select the number of events per day.
Note:
This item is only available when the Heat or
Cool Schedule is set to ZONE or MST1 to MST4.
SCHD (Schedule) Menu (1 of 2)
The SCHEDULE menu items set the schedule type,
the number of events per day, and the event times.
Continued on next page.
SC
HEDULE MENU