Metrohm 850 Professional IC MSM-HC MCS Prep 3 - Manual (Page 136)

7.16 Mains connection
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
126 ￭￭￭￭￭￭￭￭
850 Professional IC Anion – MSM-HC – MCS – Prep 3
Conductivity
detector
Cell volume 0.8 µL
Cell constant ￭ Individual calibration data saved in the detector
￭ adjustable range: 13.0…21.0 /cm
Electrodes Ring-shaped electrodes made from stainless steel
Materials in
contact with
eluent Chemically inert PCTFE
Maximum oper-
ating pressure 5.0 MPa (50 bar)
Cell tempera-
ture 20…50 °C in increments of 5 °C
Temperature
stability < 0.001 °C
Temperature
compensation 0…5 %/K adjustable, default 2.3 %/K
Heating up time < 30 minutes (40 °C)
7.16 Mains connection
Required voltage 100…240 V ± 10 % (auto-sensing)
Required fre-
quency 50…60 Hz ± 3 (auto-sensing)
Power consump-
tion ￭ 65 W for typical analysis application
￭ 25 W standby (detector to 40 °C)
Power supply unit ￭ Up to 300 W maximum, electronically monitored
￭ internal fuse 3.15 A