Metrohm 850 Professional IC MSM-HC MCS Prep 3 - Manual (Page 133)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
7 Technical specifications
850 Professional IC Anion – MSM-HC – MCS – Prep 3
￭￭￭￭￭￭￭￭ 123
Pressure range
Pump 0…50.0 MPa (0…500 bar)
Pump head 0…35.0 MPa (0…350 bar) (applies for the standard PEEK pump head)
Residual pulsa-
tion < 1 %
Safety shutdown
Function Automatic shutdown upon reaching the pressure limit values
Maximum pres-
sure limit ￭ Adjustable from 0.1…50 MPa (1…500 bar)
￭ The pump is automatically shut down at the first piston stroke
above the maximum limit value
Minimum pres-
sure limit ￭ Adjustable from 0…49 MPa (0…490 bar)
￭ The shutdown mechanism is inactive at 0 MPa
￭ The shutdown mechanism only becomes active 2 minutes after sys-
tem start
￭ The pump is automatically shut down after 3 piston strokes below
the minimum pressure limit
Gradient capacity Isocratic or gradient (extendable to quaternary)
Profile Step, linear, convex and concave
Resolution < 1 nL/min flow increments
7.8 Sample degasser
Material fluoropolymer
Resistance to sol-
vents No restriction (apart from PFC)
Build-up time for
the vacuum < 60 s
7.9 Sample preparation module (SPM)
Resistance to sol-
vents No restriction
Switching dura-
tion typ.100 ms
Operating pres-
sure 2.5 MPa (25 bar), valve function prevents damage at overpressure