Metrohm 915 KF Ti-Touch - Manual (Page 259)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
27 Manual control
915 KF Ti-Touch
￭￭￭￭￭￭￭￭ 245
Figure 13 Live display "Preparing the exchange unit"
27.3.4 Emptying
Manual control: Dosing ▶ Empty
NOTE
The function Empty is possible only with dosing units.
The cylinders and the tubings of the dosing unit are emptied with this
function.
If the titrant is selected (see "Selecting the dosing function", page 238),
the parameters defined for the titrant for preparing/emptying and the tub-
ing parameters will be used. If the titrant is not selected, default parame-
ters will be used (see Chapter 31.2.2, page 339 and Chapter 31.1.2,
page 338).
27.3.5 Filling
Manual control: Dosing ▶ Fill
You can use the function [Fill] to fill the dosing cylinder of the exchange
unit/dosing unit manually. The filling rate cannot be configured; the maxi-
mum filling rate will be used.