Metrohm 848 Titrino plus - Manual (Page 60)

5.13 Manual Control
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
50 ￭￭￭￭￭￭￭￭
848 Titrino plus
The status changes to busy. The current measured value and the
measuring temperature are displayed.
5 Stop the measurement
￭ Press [STOP] or [BACK].
The measurement is stopped. The status changes back again to
ready. If you stop the measurement with [BACK], then the dialog
will also be exited.
5.13.3 Stirring
You can control a connected stirrer manually.
Proceed as follows:
1 Open the manual control
￭ In the main dialog, select Menu and press [OK].
The main menu opens.
￭ Select the menu item Manual control and press [OK].
Manual control opens.
2 Set the stirring rate
￭ Select the Stirrer item.
￭ In the function bar, select Stir– or Stir+.
The stirring rate will be increased or decreased by one step each
time the [OK] key is pressed.
The algebraic sign changes the direction in which the stirring is
done. When the stirrer is viewed from above, this means:
– "+": counterclockwise rotation
– "–": clockwise rotation