Metrohm 848 Titrino plus - Manual (Page 129)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
10 Appendix
848 Titrino plus
￭￭￭￭￭￭￭￭ 119
Mettler AX
For the Mettler AX balance, the fields that contain the sample identifica-
tion or the method must be designated as follows:
￭ Designation for the field with the method name: METHOD
￭ Designation for the field with sample identification 1: ID1
￭ Designation for the field with sample identification 2: ID2
10.4 USB devices
Note
USB peripheral devices that are to be connected must support either
the USB 1.0/1.1 (Full Speed) or the USB 2.0 (High Speed) standard. The
maximum data transfer rate is however in any case 12 MBit/s.
Keyboards, PC mice and barcode readers are so-called HID devices
(Human Interface Device) and can be connected via a USB hub only.
Printers should also be connected via a USB hub. Depending on the
manufacturer or printer type a direct connection is however possible.
10.4.1 6.2147.000 numerical USB keypad
The [Num Lock] key must be pressed for navigating in the dialog. The
arrow keys are effective in conjunction with it.
The respective editing dialog must be opened for the numerical input.
Table 4 Key assignment
Key of the 848 Titrino plus or
function in the editing dialog Key on the numerical USB
keypad
[BACK] [Home]
[ ⇧] [⇩] [ ↑] [↓]
[ ⇦] [⇨] [ ←] [→]
[OK] [Enter]
[BS] (backspace)
Clear [Del]
Accept [Home]