Metrohm 848 Titrino plus - Manual (Page 11)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1 Introduction
848 Titrino plus
￭￭￭￭￭￭￭￭ 1
1 Introduction
1.1 Instrument description
The 848 Titrino plus is a titrator for volumetric titrations for universal appli-
cations. Methods can be created and stored under a new name. The
methods can be exported to a connected USB flash drive. This function
makes it possible for you to copy methods quickly and easily from one
instrument to another. The remote connector enables the integration of
the instrument in a Metrohm automation system.
1.1.1 Titration and measuring modes
The following titration and measuring modes are supported:
￭ DET
Dynamic equivalence point titration. The reagent is added in variable
volume steps.
Measuring modes:
– pH (pH measurement)
– U (potentiometric voltage measurement)
– Ipol (voltametric measurement with selectable polarization cur-
rent)
– Upol (amperometric measurement with selectable polarization
voltage)
￭ MET
Monotonic equivalence point titration. The reagent is added in con-
stant volume steps.
Measuring modes:
– pH (pH measurement)
– U (potentiometric voltage measurement)
– Ipol (voltametric measurement with selectable polarization cur-
rent)
– Upol (amperometric measurement with selectable polarization
voltage)
￭ SET
Endpoint titration at one or two specified endpoints.
Measuring modes:
– pH (pH measurement)
– U (potentiometric voltage measurement)
– Ipol (voltametric measurement with selectable polarization cur-
rent)
– Upol (amperometric measurement with selectable polarization
voltage)