beautypg.com

5 operation, 1 switching the instrument on and off, Switching the instrument on and off – Metrohm 848 Titrino plus User Manual

Page 29

background image

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

5 Operation

848 Titrino plus

￭￭￭￭￭￭￭￭

19

5 Operation

5.1

Switching the instrument on and off

Switching on the instrument

Proceed as follows:

1

￭

Press the red [STOP] key.
The instrument is initialized and a system test performed. This
process takes some time.

￭

If a buret unit has been attached, then a request appears to carry
out the PREP function:

All tubings and the cylinder are rinsed with the PREP (Preparing)
function. The preparing of the buret unit is described in chapter
"Preparing the buret unit (PREP)", page 45.

￭

Confirm the message with [OK].
The display of this message can be deactivated in the system set-
tings (see "PREP warning", page 54).

The main dialog is displayed:

See also other documents in the category Metrohm Equipment: