Metrohm 848 Titrino plus - Manual (Page 42)

5.7 Sample table
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
32 ￭￭￭￭￭￭￭￭
848 Titrino plus
5.7 Sample table
5.7.1 General
The sample table is a table in which the sample data for up to 99 samples
can be entered. The sample data can also be entered while a determina-
tion is running (see Chapter 5.9.2, page 38).
Activating the sample table
Proceed as follows to activate the sample table (parameter Sample table
= on).
1 Opening the main menu
￭ In the main dialog, select Menu and press [OK].
2 Opening the control dialog
￭ Select the menu item Control and press [OK].
3 Activating the sample table
￭ Select Sample table and press [OK].
￭ Select the entry on in the selection list and apply with [OK].
￭ Press [BACK].
The menu item Sample table is displayed in the main menu: