Metrohm 848 Titrino plus - Manual (Page 18)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
8 ￭￭￭￭￭￭￭￭
848 Titrino plus
2
4
8
6
5
9
1
3
7
Figure 2 Rear 848 Titrino plus
1 Electrode connector (Ind.)
For connecting pH or redox electrodes with
integrated or separate reference electrode.
Socket F. 2 Type plate
Contains specifications concerning mains
voltage and serial number.
3 Electrode connector (Ref.)
For connecting reference electrodes. Socket
B, 4 mm. 4 Mains connection socket
5 USB (OTG) connector
For connecting printers, USB sticks, USB
hubs, etc. 6 MSB connector
Metrohm Serial Bus.
For connecting a stirrer. Mini DIN, 9-pin.
7 Temperature sensor connector (Temp.)
For connecting temperature sensors of the
Pt1000 or NTC types. Two B sockets, 2 mm. 8 Remote connector
For connecting instruments with a remote
interface. D-Sub, 9-pin.
9 Electrode connector (Pol.)
For connecting polarizable electrodes, e.g.
double Pt electrodes. Socket F.