Metrohm 848 Titrino plus - Manual (Page 21)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
848 Titrino plus
￭￭￭￭￭￭￭￭ 11
Connecting a polarizable electrode
Figure 6 Connecting a polarizable electrode
Note
The electrode cable is protected against accidental disconnection of the
cable by means of a pull-out protection feature. If you wish to remove
the plug, then you must first retract the outer plug sleeve.
3.3 Connecting a stirrer
You can connect the following stirrers:
￭ 801 Stirrer
￭ 803 Ti Stand
￭ 804 Ti Stand (requires rod stirrer)
Figure 7 Connecting a stirrer
Caution
Make sure that the flat side of the plug matches the marking on the
socket.