CommScope Redwood version 3.1 - Manual (Page 39)

Commissioning and Administration User Guide 38
Install Fixtures Tool
The Engine’s ports will be shown along with a representation of the Cluster and several other
data tables. Clicking a Fixture in the table on the lower left will display configuration
information such as the Fixture’s vendor and its required number of ports. The Engine that
powers this selected Fixture will be highlighted in the upper right table.
The Install Fixtures tool provides Fixture information, such as configuration information, the
required number of ports, and the Engine that powers the Fixture.
To access the Install Fixtures tool:
Log in to the Admin console. 1.
On the home page, click Install Fixtures. 2.
The top of the Installer shows port information.
Indicator Status
No connection is detected on this port.
Connection is active.
Attention is required.