CommScope Redwood version 3.1 - Manual (Page 35)

Commissioning and Administration User Guide 34
Reboot the Engine. On the Actions tab, click the Reboot button. 11.
After the Engine reboots, it rejoins the Cluster.
Reverting System to Factory Default Settings
Caution: Reverting the configuration cannot be undone. However, you can restore the
configuration from a saved configuration file.
To revert the system to the factory default configuration:
Click the Option button in the upper right of the Redwood Manager. 1.
In the Engine Configuration screen, click the Actions tab. 2.
Next to Configuration, select Revert and click OK. 3.