CommScope Redwood version 3.1 - Manual (Page 12)

Commissioning and Administration User Guide 11
Adding a Location
To add a parent Location, click All Locations and then click the button that appears. 1.
To add a sub-Location, click the parent Location and then click the button that appears. 2.
A new Location will be automatically added as a child of the Location you started with. This 3.
Location will be called “Location” plus a number like “123”.
Click Apply, at the bottom left of the screen. 4.
If after creating Locations, you want to assign Fixtures and Wall Switches to the new Location,
see Section 2.6 Adding Fixtures and Switches.
Renaming a Location
To change the name of an existing Location, click the button and enter the new name. 1.
To save this configuration change, click Apply, at the bottom left of the screen. 2.
Moving a Location
It is possible to move Locations by simply dragging and dropping them from one parent 1.
Location to another, thus creating new hierarchy configurations.
To save this configuration change, click Apply, at the bottom left of the screen. 2.
Deleting a Location
If a Location has no child Location or assigned Fixtures, you can remove it 1.
from the hierarchy by clicking the button.
To save this configuration change, click Apply, at the bottom left of the screen. 2.