CommScope Redwood version 3.1 - Manual (Page 38)

Commissioning and Administration User Guide 37
Power LED Indicator
Power LED Engine Status
No power is being delivered to the Engine.
Blinking Engine is booting, but not yet running.
Engine is on and functioning normally.
Engine is experiencing a problem. Call
Redwood Support.
Port LED Indicators
Each port on the Engine has an LED to communicate status. After a period of inactivity, the
LEDs are turned off to save energy. You can check the status by pressing the Show Status
button on the Engine’s faceplate.
Port LED Port Status
No device connection is detected on this port.
Engine recognizes the device connection.
Blinking
Engine is updating the firmware of an Adapter
or Gateway.
Either the connected Fixture is in the process
of being discovered by the Engine, or there is
an error after discovery.
Ethernet LED Indicator
Ethernet LED Ethernet Status
An Ethernet connection is not detected on this
port.
Blinking
Engine recognizes an active Ethernet
connection.