Rockwell Automation FactoryTalk AssetCentre Installation Guide 5.0 User Manual
Page 14

1
•
I
NTRODUCTION
8
•
•
•
• •
Software requirements:
One of the following Windows operating systems:
Windows 7 Professional 32-bit or 64-bit
Windows Server 2008 Standard 32-bit or 64-bit
Windows Server 2008 R2 64-bit
Windows Vista Business 32-bit (with Service Pack 1 or later)
Windows XP Professional 32-bit (with Service Pack 2 or later)
Windows Server 2003 32-bit (with Service Pack 2 or later)
Microsoft Internet Explorer Web browser, version 6.0 or higher (version 7.0
recommended for Windows Vista operating systems)
FactoryTalk Services Platform 2.10.00 or later
RSLinx Classic Lite version 2.53 or later
RSLinx Enterprise version 5.00 or later
RSLogix 5000 Compare utility version 3.20 or later
RSLogix 5 version 7.30 or later, RSLogix 500 version 8.10 or later, RSLogix 5000
version 12 or later, Logix Designer version 21 or later, or any other version released as
part of CPR 9 or later
For Disaster Recovery functions, the appropriate programming software for your
devices MUST be installed on the agent computer.
FactoryTalk View ME
Transfer Utility
5.00 or later if your system includes PanelView
Plus operator interfaces
DriveExecutive™ Lite version 5.01 or later if your system includes Rockwell
Automation drives
For this device…
Install...
PLC-5
RSLogix 5
SLC 500, MicroLogix
RSLogix 500
ControlLogix
RSLogix 5000 or Logix Designer
PanelView Plus
View ME Transfer Utility and RSLinx Enterprise
Rockwell Automation drives
DriveExecutive Lite
FTAC-IN005A-EN-E.book Page 8 Monday, March 4, 2013 4:03 PM