Agent computer requirements – Rockwell Automation FactoryTalk AssetCentre Installation Guide 5.0 User Manual
Page 13

1
•
I
NTRODUCTION
7
•
•
•
• •
To do a Rockwell Automation Compare, you must install the appropriate
programming software on the client computer.
(optional) RSLinx Enterprise version 5.00 or later if your system includes PanelView
Plus operator interfaces
(optional) FactoryTalk View ME
Transfer Utility
version 7.00 or later if your system
includes PanelView Plus operator interfaces
(optional) DriveExecutive™ Lite version 5.01 or later if your system includes
Rockwell Automation drives
(optional) Editing software for Siemens S5 or S7 processors, including SIMATIC
Manager (Step 7), Step 5, S5 for Windows, ACCON-PG, and PG-2000
Agent computer requirements
Computers running the FactoryTalk AssetCentre agents must meet the following
minimum requirements.
Hardware requirements:
PC with 2 GHz or higher dual core processor recommended
2 GB of RAM (or more, depending on application requirements)
3 GB of free hard disk space (or more, depending on application requirements)
Graphics adapter capable of a minimum resolution of 1024 x 768 pixels
Keyboard and pointing device (mouse)
Network adapter card
For this device...
Install...
PLC-5
RSLogix 5
SLC 500, MicroLogix
RSLogix 500
ControlLogix
RSLogix 5000 Compare utility
Rockwell Automation drives
DriveExecutive Lite
FTAC-IN005A-EN-E.book Page 7 Monday, March 4, 2013 4:03 PM