Rockwell Automation DeviceNet Media Design Installation Guide - Manual (Page 75)

Publication DNET-UM072C-EN-P - July 2004
Make Cable Connections 3-15
3. Repeat the end cap installation process as outlined previously. Close the
IDC base and continue with connection as illustrated in the standard
installation instructions starting on page 3-10.
Install Class 1 KwikLink power cable
Install Class 1 KwikLink power cable as you would network cable. Refer to
page 3-10 for installation instructions. You can use auxiliary power cable
with the ArmorBlock MaXum cable base (1792D-CBFM) and I/O modules
(1792D series). When running cable into an enclosure, use flat cable gland
1485A-CAD.
.
30481
30482 30483
Class 1Auxiliary Power Cable
Spool size Catalog number
75 m (246 ft) 1485C-P1L75
200 m (656 ft) 1485C-P1L200
420 m (1378 ft) 1485C-P1L420
Auxiliary Power Cable
Wire
Color Wire
identity Use
white user
defined user
defined
blue user
defined user
defined
black V- output
power
red V+ output
power
30493-M
black PVC jacket
red and black
dc power pair 16 awg
white and blue
user defined pair 16 awg
5.3 mm (0.21 in.)
19.3 mm
(0.76 in.)
2.50 mm
(0.10 in.)