Rockwell Automation 2711E-xxxx PanelView Operator Terminals User Manual - Manual (Page 154)

Specifications: 1200e Operator Terminal B–2
Publication 2711E-821 – January 1998
Clip mount:
•
CSA C22–2 No. 94–M91, ENCL 12, 13 (Indoor Use Only) from
the front
•
UL 50, 1992, ENCL 12, 13 (Indoor Use Only) from the front
•
NEMA 12, 13 (Indoor Use Only) from the front
•
Keypad terminal 33.8 lbs (15.3 kg)
•
Touch screen terminal 32.6 lbs (14.8 kg)
These weights do not include any shipping materials used to package
PanelView 1200e terminals.
This section describes front panel design specifications for the
PanelView 1200e keypad and touch screen terminals.
Keypad Terminals
Key Panel: black anodized sheet aluminum with continuous
hard-coated, scratch-resistant polyester surface
Keys: sealed, stainless steel dome membrane switches with
tactile feedback and an actuation force of 1 lb
(0.455 kg), mounted on the key panel’s anodized
aluminum backer plate. Keys are rated for 2,000,000
presses.
Window: continuous water-clear polyester over chemically-
strengthened glass
Custom legends can be inserted in the 21 user-configurable function
keys and the Select, Cancel, Raise and Lower keys.
Stainless Steel Keypad Terminals
Stainless Steel: 304, brushed, #4 finish
Note: There are no custom legend inserts on Stainless Steel Keypad
Terminals.
Terminal Weights
Front Panel Design
"