Rockwell Automation 6188 Workstation User manual - Manual (Page 15)

Making Connections 15
Publication 6188-UM001A-EN-P
Install your computer in a Local (Safe) Location some distance from the
Operator Display Station to protect it from the harsh environment. This
area should be compatible with your computer’s environmental needs.
1. Bring the Cat-5 (UTP)
communications cable into the
Operator Display Station via the
lower rear access panel.
2. Route this cables into the Operator Display Station separately from
the power cable.
3. Route Cat-5 (UTP) communications cable to the signal extender
receiver mounted on the rear door of the enclosure.
The Signal Extender is simple-to-install, and no software or expensive
networking is required. There are no switch setting changes required to
adapt to the connected peripherals.
The advanced circuitry provides automatic compensation for different
cable lengths, video resolutions and COM serial port data rates.
Signal Extender Receiver
The Signal Extender Receiver unit is factory installed in the 6188 with
the video, PS/2 keyboard, PS/2 touchmouse and optional serial
touchscreen cables pre-wired.
The extender power supply is included, mounted, and pre-wired to the
Receiver unit inside the Operator Display Station enclosure.
Signal Extender Transmitter
The Signal Extender Transmitter module comes as a boxed accessory
with your system. This must be installed at the host computer.This
includes the following:
•
Transmitter box
•
Custom prefabricated cable bundle that has Video, Keyboard and
Touchmouse cables all terminating into one 25 pin D-sub connector
marked “CUFC-GC”.
•
Serial cable for computer connection of the touchscreen will also be
included if you purchased the touchscreen option.
The Signal Extender Transmitter module also supports a local monitor,
keyboard and mouse for redundant control, troubleshooting, backup and
hardware and software maintenance.
Connecting the Cat-5
Cable between the
Operator Display Station
and the Host Computer
Signal Transmitter
Installing the Signal
Extender