Rockwell Automation 9220-WINTA ControlNet Traffic Analyzer Reference Manual - Manual (Page 80)

Publication 9220-052C-EN-P - August 2002
8-4 Troubleshooting
1. Click the Start on Conditions radio button in Start Trigger
view.
2. Click the right mouse button in Filter/Trigger view and select
Add Trigger Condition.
3. Check the Good status and Moderator type boxes in the Edit
Trigger dialog box.
4. Click OK.
Start Trigger Filter/Trigger view should look like the following
illustration.
5. Click the No Stop Condition radio button in Stop Trigger view.
6. Click the Filter on Conditions radio button in Pre-Filter view.
7. Click the right mouse button in Filter/Trigger view and select
Add Filter Condition.
8. Check only the Good and Bad status boxes and Unscheduled
type box in the Edit Filter dialog box.
9. Click OK.
Pre-Filter Filter/Trigger view should look like the following illustration.