Rockwell Automation 9220-WINTA ControlNet Traffic Analyzer Reference Manual - Manual (Page 14)

Publication 9220-052C-EN-P - August 2002
1-4 Introduction
Software Package The software package is a Windows based product so as to maintain
consistency across all ControlNet software products and to provide a
user-friendly human interface. It is composed of a CD-ROM
installation disk plus the reference manual.
Hardware
Recommendations The ControlNet Traffic Analyzer requires a dedicated computer with
the following minimum configuration for:
•
Microsoft  Windows 95  or Windows  98 or Windows  Me
•
166MHz Pentium-based PC
•
32MB RAM
•
10MB free hard drive space
•
a color monitor with an 800 x 600 minimum resolution (1,024
x 768 recommended)
•
Microsoft  Windows NT  4.0
•
166MHz Pentium-based PC
•
80MB RAM
•
10MB free hard drive space
•
a color monitor with an 800 x 600 minimum resolution (1,024
x 768 recommended)
•
Microsoft  Windows  2000 or Windows  XP
•
366MHz Pentium-based PC
•
128MB RAM
•
10MB free hard drive space
•
a color monitor with an 800 x 600 minimum resolution (1,024
x 768 recommended)
To capture data on a ControlNet network, one of the following
interface cards is required:
•
1784-PCC Series B Allen-Bradley ControlNet Interface Card
(PCMCIA) with:
•
installation disk version 1.6 or later (shipped with the
1784-PCC card). If your installation disk is earlier than 1.6, we
recommend that you download the latest version from the
website www.ab.com./support/products/pccards.html.
•
Microsoft Windows 95, Windows 98, Windows Me, Windows
NT 4.0, Windows 2000, or Windows XP