Rockwell Automation 9220-WINTA ControlNet Traffic Analyzer Reference Manual - Manual (Page 63)

Publication 9220-052C-EN-P - August 2002
Network Information and Statistics 6-3
In both cases, the statistical information corresponds to the selected
frames. A filter, similar to the one used for pre-filter, creates the
selection of data that is used for the statistical display. This
information is based off the interval count.
Statistical Data: Network Traffic
The Network Traffic bar graph shows how the traffic is distributed
among the nodes on the network as a function of selected ControlNet
frames.
The X-axis represents the Node addresses and the Y-axis represents
the number of MAC Frames that were received.
The Statistical Information dialog box, with Network Traffic displayed,
is shown below. Access the Statistic Information dialog box with the
Statistic button on the toolbar or from the Actions menu.
Filter for the selection of data
that is used for statistical
display. Select the Network
Traffic view.