Rockwell Automation 9220-WINTA ControlNet Traffic Analyzer Reference Manual - Manual (Page 17)

Publication 9220-052C-EN-P - August 2002
Introduction 1-7
You see this screen:
7. Click on Install ControlNet Traffic Analyzer.
8. Follow the on-screen instructions to install the driver and the
Traffic Analyzer.
You need to have a ControlNet 1784-PCC PC card or a CN-1000
ISA card installed to work on line. If you do not have a card, ask
your local Rockwell Automation representative for a 1784-PCC
card package at:
•
Telephone: 1.440.646.5800
or contact Pyramid Solutions for a CN-1000 card at:
•
Web: www.pyrasol.com/Expertise_DataCom_Support.htm
The ControlNet Traffic Analyzer has to be the single client of the
ControlNet card. You can use the ControlNet 1784-PCC PC card
or the CN-1000 ISA card for applications other than the Traffic
Analyzer, but you cannot run these applications simultaneously
with the same card. If you use another application with the card,
you must go in offline mode or close the Traffic Analyzer tool.
For more information about the online/offline modes, see page
7-3.
IMPORTANT
Some screen savers take all the CPU resources. When the
Traffic Analyzer tool is in data recording mode, it may lose some
data. You must choose the “blank screen” or “none” option in
the display properties of the Screen Saver.