Rockwell Automation 2706-LV2S_LV4S DL40 PLUS SLAVE USER MANUAL - Manual (Page 42)

Publication 2706-6.3
Terminal Mode 6-3
New Line (Ctrl-_) (1F hex)
Moves the cursor to the beginning of the line below. If the cursor is
on the last line, every line is moved up one line and the bottom line is
cleared.
Delete Line (Esc and then R) (1B, 52 hex)
Clears the current line. The cursor remains at its current position.
Insert Line (Esc and then E) (1B, 45 hex)
Moves the current line and all lines below it down one line (text on
bottom line is removed). Then clears the current line. The cursor
remains at its current position.
Set Cursor Position (Esc,=,,) (1B, 3D hex)
Moves the cursor to the specified row and column. Refer to the
following table. If you exceed the parameters listed in the table, the
cursor position defaults to the greatest row or column number.
For example, the following ASCII character sequence places the
cursor in Row 3, Column 9 of a four line display: ESC= “(
Set Cursor Invisible (ESC . 0) (1B, 2E, 30 hex)
Makes the cursor invisible.
Set Cursor Visible (ESC . 1) (1B, 2E, 31 hex)
Makes the cursor visible.
De-energize Relay (ESC . 2) (1B, 2E, 32 hex)
De-energizes the annunciator relay.
Energize Relay (ESC . 3) (1B, 2E, 33 hex)
Energizes the annunciator relay.
Column 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Row 1 2 3 4
ASCII SP ! “ # $ % & ‘ ( ) * + , _ . / 0 1 2 3
Decimal 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
Hex 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 30 31 32 33