Rockwell Automation 1771-PM , D17716.5.18 U MNL 1771-PM CLUTCH/BRAKE MOD - Manual (Page 5)

Chapter
1
1Ć1
Introduction
This chapter will help you become familiar with the:
objectives of this manual
procedure for using this manual
We have written this manual to help an electrical engineering technician,
or any person with a similar background:
design a clutch/brake controller for a mechanical power press using the
1771-PM clutch/brake module.
install the clutch/brake controller
troubleshoot the clutch/brake controller
The overall safety of your mechanical power press rests upon your
knowledge of this manual and other referenced documents. Moreover, the
ease with which you can understand each chapter rests upon your
knowledge of previous chapters.
To simplify your installation and maintenance tasks, we recommend that
you become familiar with this entire manual before installing your
clutch/brake controller. The following suggestions should help you use
this manual:
Before reading this manual, scan through it. This will help you
understand its organization.
Before installing your clutch/brake controller, read this manual
thoroughly. You should also read other publications that we refer.
While installing or troubleshooting your clutch/brake controller, use
this manual as a reference.
Chapter Objectives
Objectives Of This Manual
How To Use This Manual