Rockwell Automation 1769-SM1 Compact I/O to DPI/SCANport Module - Manual (Page 41)

Configuring the Module 3-11
3. In the Module Properties screen ( Figure 3.11 ), enter a name for the
module, such as “My_1769_SM1.” Change the Comm Format to
“Data - INT,” which will enable the entry of Output Connection
parameters (no longer grayed out). Enter the Slot location of the
1769-SM1 and enter “60” for the Input, Output, and Configuration
Connection Parameters. Click Next >.
Figure 3.11 Module Properties Screen
4. On the Module Properties last screen ( Figure 3.12 ), click Finish >>.
Figure 3.12 Module Properties Last Screen
5. The menu tree ( Figure 3.13 ) will now show the 1769-MODULE that
you created.
Figure 3.13 Menu Tree Window with Listed 1769-MODULE